CREAM SEPARATOR MACHINE
- A separator is a centrifugal device that separates milk into cream and skimmed milk. Separation was commonly performed on farms in the past.
- All-Electric (Alfa Model) Capacity of 325 Liter Per Hour. All Milk Contacting Part is made from Stainless Steel AISI-304 with 1/4 H.P Single Phase Electric Motor.
- cream separator, a machine for separating and removing cream from whole milk; its operation is based on the fact that skim milk (milk with no butterfat) is heavier than cream. Most separators are controlled by computers and can produce the milk of almost any fat content
Features.
- The Centrifugal bowl is made of Stainless Steel AISI 304.
- Collecting Cover And Float of AISI 304.
- Bowl is Dynamically balanced.
- The lubrication system is completely eliminated.
- The unique drive system consists of a special High torque motor of 1/4 HP and flat belt drive, which has eliminated the necessity of drive gears lubrication and friction clutches.
- Due to the absence of friction clutches, there is no slippage for the worn-out friction pad and a tachometer is not required.
- Rubber gasket which comes in contact with milk is resistant and non-absorbent.
Product Details:
| MILK SEPARATION CAPACITY | 325 LPH/HR |
| BOWL SPEED | 7000 RPM |
FRESH MILK INPUT | STRAINED |
| FRESH MILK INPUT TEMP. | 30°C TO 40°C |
| MODEL | 60 LPH |
| ELECTRIC MOTOR | 220V, SINGLE Phase, 50Hz, 1/4 HP |
| DIMENSION (Unpaced) - L x W x H | 30*X 2*x32* |
| PACED VOLUME | 0.35 CBM |
| WEIGHT NETT. | 70 KGS |
| WEIGHT GROSS | 95 KGS |
The range of products offered by us is of premium quality that boasts of client’s confidence. We consider passing each and every finished product through stringent product inspection processes to ensure that deliveries made at our client’s end are absolutely flawless.
